A Homeowners’ guide on DIY for a Gas Boiler Repair

 

Introduction 

Gas Central Heating is the most popular heating method in the UK. According to a recent survey conducted by the UK Department for Business Energy & Industrial Strategy (BEIS) and published in Statista, it was found that 85% of respondents used gas central heating. Many of us are unaware of the working and components of the central heating system. When it comes to gas boiler repair in London, it is essential to use a registered gas safety engineer. 

When you have a boiler, central heating issues or need your emergency boiler repaired in London, it is best to call a professional gas safety engineer. 

Should you have a boiler emergency, it is a good idea to have some working knowledge should you ever have to perform an emergency boiler repair. 

By the time you finish reading this article, you will have a good idea on what to do if something goes wrong with your boiler, or it suddenly breaks down. You will also get a better understanding of the boiler should an engineer need to instruct you over the phone or when they arrive to repair the boiler. 

What are Gas Boilers? 

Gas Boilers produce hot water and heat the home, like mini fires. These central heating systems continuously heat water, pump it through pipes and radiators, spreading heat around the property to heat the house. The hot water is either pumped to taps and showers directly, like in the combi boiler or stored for future use in a water tank. The boiler works on either bulk LPG, stored on-site, or on the on-grid gas. This gas is then burned in the boiler’s combustion chamber that raises the water temperature to around 70°C using a heat exchanger. 

Components of a Gas Boiler 

In case you face problems and need emergency boiler repairs, you must know the essential parts of the Gas Boiler. It will enhance your knowledge and help you identify the critical points to target and repair. 

●        Gas burner - to generate the heat which in turn warms up your home

●        Heat exchanger - a device used to exchange heat between water and other components

●        Control technology - to control the functioning of the gas heating system and temperature

●        Diaphragm expansion vessel – these are pressurised water vessels to expand and absorb water pressure that surges during heating

●        Exhaust Pipe – it is usually a thin plastic pipe pulled through the chimney to remove traces of carbon monoxide produced as a by-product of the gas boiler heating process

 

Easy ways for Gas Boiler Repair 

Now that you have a sound understanding of the Gas Boiler, the following points will help you in emergency Gas Boiler Repair in London. 

1. Re-pressurise your boiler - First, make sure to turn off the boiler, and check if the end of the hose is attached to the valves. Now, look at the water pressure indicator on the front of your boiler. If it is below one, then the boiler pressure is too low. Open the valves until the pressure indicator reaches 1.5. Close the valves and switch the boiler back on.
2. 2. Resetting your boiler - Press the Reset button and push it for 10 seconds. The boiler should start working again after a few minutes. Repeat it the second time if the first reset doesn’t work.
3. Bleed your radiators - It is essential to check the radiators annually. When you heat your home, check your radiators for any cold spots. After seeing the problematic radiator, turn off the central heating and turn the radiator key anti-clockwise to allow the gas to escape. You should hear the pressure leaving the system. Close the valve once all the gas has escaped.
4. Replace thermostat batteries - Find the battery removal slots to change the old batteries. 

So, next time don’t fret if your heating system goes faulty. Try working out on the points shared in this blog for Gas Boiler Repair in London. Call profession and experienced Plumbing Service providers to manage your emergency boiler repair and replacement needs.